​

Fascia

The fascia board is the long, straight board that runs along the lower edge of the roof. The fascia is fixed directly to the lower ends of the roof trusses and usually does all the work of supporting the lower edge of the bottom row of tiles. The fascia board also carries all the guttering. 

​

This is no mean feat, especially when it is raining hard. In a downpour the roof of a 3-bed semi could be washing several gallons of water per second into its gutters.

​

Bargeboard

This is the board that is used on the gable end of a house. The condition of the bargeboard can often make or break the look of a house, and over the years it has evolved into some very attractive shapes.

Soffit

​

Soffit

The soffit board is tucked away under the fascia board. It is usually the board that you see most of from street level. The soffit can be ventilated to allow the flow of air into the roof area. Alternatively, ventilation can be provided over the top of the fascia board. Many people prefer the latter solution these days. Without adequate ventilation, condensation will form in the roof void increasing the risk of timber decay.

​

Boxend

The Box End is a work of art, accommodating as it does the many different angles, planes and heights of the fascia, soffit and bargeboard at each corner of the house where there is a gable end.

​

For all your Roofing & Guttering needs, ** SMALL JOBS A PLEASURE ** ALL JOBS WELCOME** ***BEST PRICES ON RE-ROOFS***